CANNTECH SERVICES是您可信赖的专用大麻收割和加工设备供应商。 我们位于安大略省，主要为达到或超过加拿大卫生部，OHSA和ESA规定的所有准则的工业级产品提供许可的生产商，微型产品，医疗用品和加工商。 凭借我们丰富的行业经验，我们能够提供独立设备和交钥匙收获解决方案。

CANNTECH SERVICES is your trusted supplier of purpose-built cannabis harvesting and processing equipment.
We are located in Ontario and primarily service Licenced Producers, Micros, Nursuries and Processors with industrial-grade products that meet or exceed all the guidelines set out by Health Canada, OHSA and ESA.
With our in-depth industry experience, we are able to offer both stand-alone equipment and turnkey harvesting solutions.

https://youtu.be/BsfuLiUjTdg

https://youtu.be/iwOiDnwsgqU

CannbuckerX

Cannbucker用来从植物的砧木中取出花朵（芽）。集成的削片机将废料切成小块，易于处理。所有不锈钢产品的接触区域。 Cannbucker具有变速进料辊和快速更换模板，以适应湿式和干式弯曲。

The Cannbucker is used to remove flower (bud) from the stock of the plant. The integrated chipper cuts the waste stock into small pieces for easy disposal. All stainless steel product contact areas. The Cannbucker has variable speed feed rolls and quick change die plates to accommodate wet and dry bucking.

Cannmill

我们的Cannmill是用于预提取或准备轧制的研磨机。根据应变和颗粒大小，其吞吐量为50-110磅/小时。该轧机全部为304不锈钢卫生GMP结构。它是一种移动设备，高度约为40“ x 40”和54“

我们的Cannmill可以实现1mm-6mm的恒定粒度，具体取决于研磨筛。我们的大多数客户都喜欢2mm的提取。我们的磨机以极低的速度运转，不会产生热量或细小的物料。我们的铣刨转子和筛网可在几秒钟内拆除，无需任何工具。

Our Cannmill is a grinder for pre-extraction or ready to roll. It has a throughput of 50-110 lbs/hr depending on strain and particle size. This mill is all 304 Stainless Steel sanitary GMP construction. It is a mobile unit and measures roughly 40" x 40" and 54" Tall

Our Cannmill will achieve a consistent particle size of 1mm - 6mm depending on milling screens. Most of our clients prefer 2mm for extraction. Our mill operates at very low speed and does not create heat or fine material. Our milling rotor and screens can be removed in seconds for cleaning and no tools are required.

Destructocann

The Destructocann is a purpose built machine for the denaturing of Cannabis waste. This machine offers a safe turn key solution to meet Health Canada requirements for waste destruction. Our standard Destructocann is a dual shaft shredder with full PLC load sensing and auto reverse. We have several sizes that range from 200 to 4000 plant per day.

Destructocann是用于大麻废物变性的专用机器。该机器提供了安全的交钥匙解决方案，可以满足加拿大卫生部对销毁废物的要求。我们的标准Destructocann是具有完整PLC负载感应和自动反向功能的双轴破碎机。我们有几种尺寸，每天的植物数量从200到4000不等。